Billet Specialties Tru Trac # 13805 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Silnik Billet Specialties Tru Trac # 13805. Billet Specialties Tru Trac # 13805 11 stron. For systems without a/c, small block chrysler

Drukuj stronę

Figure 13: Install Idler Pulleys

Apply Loc-Tite to the threads of the three 3/8-16 x 1-3/4" ARP 12-point cap

screws.

A] AC Delete Idler Pulley: Thread a 3/8" ARP 12-point cap screw with

aluminum washer through the large idler pulley and pulley boss into the

bridge bracket and tighten firmly 46ft/lb.

B&C] Small Idler Pulleys: Thread the second 3/8" ARP 12-point cap screw

through the small idler pulley-cover, pulley and pulley boss into the bridge

bracket and tighten firmly, 46ft/lb. Repeat for other side.

With Power Steering

Figure 15: Install Belt &

Tensioner Pulley

A] Apply anti-seize to one

3/8-16 x 3/4" ARP 12-point cap

screw.

Route serpentine belt as shown

below - minus tensioner pulley.

Place a 5/8" box end wrench

on tensioner.

B] Align belt onto pulley and pull up

on wrench to release tension until

tensioner pulley slips onto

tensioner shaft.

Slowly return wrench to starting

position to apply tension to belt.

C] Remove wrench and install the

3/8-16 x 3/4" ARP 12-point cap

screw with thrust washer onto pulley

and tighten firmly (46 ft/lbs).

Without Power Stering