Aqua One 94115 Rozwiązywanie problemów - Strona 2

Przeglądaj online lub pobierz pdf Rozwiązywanie problemów dla Akwaria Aqua One 94115. Aqua One 94115 2 stron.

Trouble Shooting

HEAD UNIT STUCK ON CANISTER BODY

1. While pump is still plugged in and running,

remove the screw cap from the intake pipe.

The intake pipe is the one which feeds the

water into the filter unit. This will create an

airlock in the canister body.

2. Once the airlock has been created (you

will know when the water stops flowing

from the outlet) turn the filter off at the

receptacle and remove the screw cap from

the outlet pipe.

3. Release the 2 locking clips and the 2

locking levers and remove a hose from

either the inlet or outlet U pipe by loosening

the lock nut and pulling the hose from the

hose tail.

4. Remove the other hose at the tap. Now

place one hand over the tap where the

hose has been removed and blow into the

hose.

Nautilus

5. This will create pressure in the canister

body and pop the head unit off.

If the filter is new and the head unit is on tight

simply attach the tap unit and ensure the

locking lever is down

so the taps are open.

Ensure all clips are released.

Cap either the "IN" or "OUT" with your hand

and blow into the other. This will create

pressure and pop the head off.

NOTE: To avoid having this problem in the

future maintain your filter regularly! Prior

to refitting the head remove the o-ring and

lubricate it with an aquarium safe lubricant.

This will not only improve the seal but make

removing the head a lot easier.

Inspiring Excellence in Fish Care!

2700