Aqua One ReefSys 255 Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Akwaria Aqua One ReefSys 255. Aqua One ReefSys 255 16 stron.
Drukuj stronę
S
PECIFICATIONS
M
ODEL
REEFSYS 255
REEFSYS 326
R
R
EPLACEMENT
EPLACEMENT
F F
M M
& &
ILTER
ILTER
M
ODEL
53443-FS
REEFSYS 255
REEFSYS 326
53443-FS
Carefully unpack the aquarium making sure you keep all the packing material until
Carefully unpack the aquarium making sure you keep all the packing material until
all the parts of the product have been found and the product has been assembled.
all the parts of the product have been found and the product has been assembled.
This product is shipped to you in a factory sealed carton. Should the product
This product is shipped to you in a factory sealed carton. Should the product
malfunction in any way or if the unit is damaged and requires replacement,
malfunction in any way or if the unit is damaged and requires replacement,
contact the retailer where the product was purchased for inspection.
contact the retailer where the product was purchased for inspection.
AQUARIUM
SUMP
VOLUME
VOLUME
207L
48L
278L
48L
P P
ARTS
ARTS
EDIA
EDIA
Filter
Sock
SYSTEM
D
IMENSIONS
VOLUME*
90L X 55D X
255L
53/80H
120L X 55D X
326L
53/80H
*Sump volume was calculated with
*Sump volume was calculated with
all baffles set to maximum height
all baffles set to maximum height
at a flow rate of approximately
at a flow rate of approximately
3500L/h.
3500L/h.
Actual sump and total system volume will
Actual sump and total system volume will
vary according to flow rates, baffle settings
vary according to flow rates, baffle settings
and equipment used.
and equipment used.
To calculate actual system volume, we
To calculate actual system volume, we
recommend that the system is set up with
recommend that the system is set up with
all equipment in place and running. After
all equipment in place and running. After
the water levels have stabilised, turn off
the water levels have stabilised, turn off
power to all equipment.
power to all equipment.
Once all water levels have settled (allow
Once all water levels have settled (allow
at least ten minutes), measure all water
at least ten minutes), measure all water
levels and calculate volume from these
levels and calculate volume from these
measurements.
measurements.
Alternatively, if the system is filled using
Alternatively, if the system is filled using
containers, it is relatively simple to
containers, it is relatively simple to
calculate by counting the containers used.
calculate by counting the containers used.
Inspiring Excellence in Fish Care!
3