Billi Quadra Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Armatura kuchenna i łazienkowa Billi Quadra. Billi Quadra 12 stron. Xl, xt, xr tap options
Również dla Billi Quadra: Podręcznik użytkownika (13 strony), Instrukcja instalacji (8 strony), Instrukcja instalacji (7 strony)
Drukuj stronę
User guide
Billi Quadra & Quadra Plus.
– If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid creation of a hazard .
– Billi hose sets as supplied with the
appliance are to be used . Old or other
manufacturer's hose sets should not
be re-used .
– If the appliance is located where the
ambient air temperature could fall below
4°C when the heater is not in use, do not
turn off the power supply to the appliance .
This safeguard does not offer the same
protection to the connecting pipework
and fittings .
– The ambient temperatures this unit
should operate within are 4°C to 45°C .
– Turn off power to unit, by unplugging the
power cord from the power point, if water
supply is turned off
Caution and safety
Boiling water is dangerous and can
cause severe burns, particularly with
young children . Boiling water must always
be handled with caution . Use this appliance
only as directed in these instructions and
only for the purpose for which it has been
designed . Your Billi Quadra is designed to be
safe and practical . In an environment with
young children, it is recommended that the
boiling water safety switch is activated .
The following safety features have been
included:
– Ergonomic levers
– Levers/touch activations located
safely above water outlet .
– Smooth electronically controlled boiling
water flow rate . Flow is briefly reduced as
water first enters cup to prevent splashing .
– Dispenser remains cool to touch .
– Childproof safety switch .
– Boiling water Safety Isolation mode .
General Maintenance
Your Billi Quadra has been designed to
require minimal maintenance other than
replacement of filter cartridges . During each
filter change, check all water connection
fittings for signs of leakage . Check all tubing
for any signs of damage . Check the cupboard
area around the base of unit for any signs
of moisture . For air cooled units, ensure
side vents of the under bench module are
kept clear and airflow is not obstructed .
Restricted airflow will cause inefficient
operation of the refrigeration system .
—Cleaning the dispenser
Your Billi Quadra Dispenser is fabricated
from solid zinc casting material with tough
protective chrome plating . Proper care of the
Billi Electronic dispenser crucial; Avoid using
abrasive cleaners . Wipe clean using a damp
cloth . Use of a non-solvent, non-smearing
cleaner such as Windex is recommended .
Do not pour water over dispenser .
Cupboard ventilation requirements
Your Billi Quadra underbench module
requires no cupboard ventilation but
requires air space around the unit of 10mm .
Care should be taken when using the cupboard
space, to avoid stretching or damaging plastic
pipe work . Check fittings and tubing at each
filter change for signs of damage or leakage .
Always ensure access to power switch and
water supply tap is not restricted .
3