Aqua One Versalight Instrukcje

Przeglądaj online lub pobierz pdf Instrukcje dla Akwaria Aqua One Versalight. Aqua One Versalight 2 stron. Led 24 & 36

Drukuj stronę

Know Your Light

a. Switch

b. Cover Screw

c. LED Lamps

d. Casing

e. Flexible Mount

f. Mounting Bracket

g. Fastening Screws

Aqua One - 2 + 1 Year Guarantee

Congratulations on your purchase of a quality Aqua One product. This product will last for many years under

normal usage the guarantee commences from the day of purchase. You must provide proof of purchase when you

submit your equipment for repair under guarantee.

The benefits given to the purchaser by the manufacturers guarantee are in addition to all other rights and remedies

which the purchaser has in respect of the equipment under the legislation of the appropriate country of purchase.

Your 2 year guarantee can be extended by a further 1 year upon registration with the distributor. This can be done

online at the address below or by completing the extended guarantee registration card and returning by post to the

address of your country of purchase. www.aquaone.com.au

General Guarantee Conditions:

1. All claims for guarantee service should be made to the place of purchase.

2. You must provide proof of purchase when you submit your equipment for repair under guarantee.

3. This guarantee extends only to defects occurring in materials or workmanship under normal use of the

equipment when operated in accordance with the supplied instructions.

4. Replacement equipment is guaranteed for the remainder of the original manufacturer's guarantee period.

5. Guarantee does not cover:

a. Cost of freight, postage or the cost of insurance.

b. Service costs arising from failure to correctly adjust the controls of the product or to clean the hoses, filter media,

impellers, pump heads, failure to observe the manufacturer's instructions or inspections that reveal that the

equipment is in normal working order.

c. Equipment failures caused by misuse, neglect, normal wear and tear, accidental breakage, repairs or

modification by unauthorised persons, lightning strikes, mains voltage fluctuation, earthquakes, vermin infestation

or liquid spillage.

d. Consumables, such as impellers, shafts, filter cartridges, filter media, sponges, wool, light tubes, lamps, bulbs

or starters.

e. In no event will the manufacturer or distributor of that country be liable for any consequential or incidental

damage including, but not limited to loss of livestock, property damage, damage to equipment, appliances or

furnishings arising from the use of this product or from failure of this product.

f. Damaged incurred in transit resulting from inadequate packing.

6. It is recommended that all equipment subject to claim should be prepared for transportation in its original

packaging or other suitable packaging which offers the same degree of protection.

Instruction Version 10/01/2007

Drip Loop

Step By Step Guide

1. Decide where you are going to position the light.

2. Mount the light on the aquarium and tighten the fastening screws. Hand tight

will be sufficient.

3.Ensure your hand is not wet, plug the transformer in to the power receptacle,

arrange a drip loop and turn on.

4. Turn the light switch on. It is located on the end of the unit.

5. The flexible mount gives you the ability to vary the intensity and angle of the

light.

6. Ensure your aquarium has a glass lid on it.

Precision Manufactured in the P.R.C.

Designed in Australia by Aqua One

Distributed in Australia by:

Kong's (Aust.) Pty. Limited

48 Williamson Rd. Ingleburn

2565 NSW Australia

Distributed in New Zealand by:

Kong's (NZ) Limited

52 Glenlyon Avenue, Greerton

Tauranga New Zealand

Distributed in Hong Kong by:

Kong's Aquarium Supplies Co., Ltd

No 31, 3/F Thriving Industrial Centre

26-38 Sha Tsui Road, Tsuen Wan,

Hong Kong

Distributed in the UK by:

Kong's (UK) Limited,

C/O Aqua Pacific UK Ltd.

PO Box 268

Romsey Hampshire

SO51 0WW

United Kingdom

www.aquaone.com.au

® Aqua One and Kong's are registered trademarks.