AvonSynth AVS-MIDI-1 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów AvonSynth AVS-MIDI-1. AvonSynth AVS-MIDI-1 7 stron. Midi to cv converter

Drukuj stronę

The

User Guide

Simple Monophonic Voice Example

A standard single-voice example is illustrated below. This example has the AVS-MIDI-1

being controlled by a MIDI device such as a keyboard or sequencer, and playing

a tuned sawtooth wave in a monophonic manner. Once the patch is set up, the

VCO should be set to at least 20Hz (the lowest audible output from the sine wave out)

and the VCO output should be connected to the Tune Input as shown by the purple line.

Once the tuning routine is complete, this patch cable can be removed.

MIDI

Input

Explanation

In this example, the gate output from the AVS-MIDI-1 triggers the ADSR envelope to

open up when each note is pressed. The envelope then controls the VCA, letting sound

through when notes are played. The V/OCT output controls the pitch of the VCO, which

should be providing 12-TET tuning referenced to A=440Hz if the tuning routine has been

carried out. The VCO output (sawtooth in this case) is sent to the VCA, and the output of

the VCA is sent to your ampliﬁer and speakers (perhaps via a mixer or other equipment).

If you would like softer presses on the keyboard to generate softer notes, you can connect

the VEL output from the AVS-MIDI-1 to also control the VCA, though this is optional. If this

patch is replicated with 4 VCOs, 4 ADSRs, and 4 VCAs, rich 4-note polyphony can be

achieved. The Mod Wheel and Aftertouch outputs can also be used to control various

aspects of the sound such as vibrato amount or ﬁlter cutoﬀ.

www.AvonSynth.com

AVS-MIDI-1

MIDI to CV

Converter

Audio

Output

Page 5 of 7