Aqua One Oakstyle Chic 3+2 Unit Instrukcja montażu - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Aqua One Oakstyle Chic 3+2 Unit. Aqua One Oakstyle Chic 3+2 Unit 20 stron.
Drukuj stronę
Step 26
This unit must be fixed to a wall using
Secure the unit to a
the Overbalance Protector Kit provided
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
a:
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
Top
Top
overbalancing this unit
must be secured to a
b:
S
S
suitable wall by fitting the
Overbalance Protector
Kit to a wall.
b:
Push the unit up
against the wall and slide
S
the Brackets against the
wall. Fit the 2nd Screws
from the kit into the
underside of the Top
panel.
Mark the slot at the back
S
of the Brackets for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Take care when drilling
the wall that you do not
drill into any pipes, wires
etc. If in doubt, consult an
expert.