Aqua One Styleline 51 Instrukcja montażu - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Aqua One Styleline 51. Aqua One Styleline 51 13 stron.

Drukuj stronę
Step 20
Fit the Door and Handle
Note: The easiest way to
attach the Door is to fit
the top Hinge first, then
align and fit the other
Hinge.
a:
Push the Hinge
onto the front part of the
Hinge Plate.
The recess at the bottom
of screw B goes into the
slot in the Hinge Plate.
b:
Keep the Hinge
FLAT against the Hinge
Plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The Hinge must be
flat against the Hinge
Plate prior to any
adjustment.
d:
The Hinge must NOT
be AT AN ANGLE to the
Hinge Plate when
assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
Hinge Plate and the
Hinge would not be
secure.
Remove the Hinge from
the Hinge Plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach the Handle to
the Door using two
19mm Screws.
a:
I
N
c:
I
N
b:
I
N
N
B
d:
I
N
e:
L
9
I
A
B
E
E