AVOURY ONE Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenia kuchenne AVOURY ONE. AVOURY ONE 20 stron.
Również dla AVOURY ONE: Podręcznik użytkownika (20 strony), Skrócona instrukcja obsługi (10 strony), Skrócona instrukcja obsługi (3 strony)
Drukuj stronę
U S E
The contents of the following pages
EN
refer to the machine software from
version 1.3.58. To perform the system
update, download the free Avoury App
(see chapter „Control via Avoury App").
Setting the water hardness
1.
Switch on the tea machine.
2. Press the buttons for setting the brewing
time –
/+
on the tea machine shows the level of
16
water hardness currently set.
3. To set the water hardness level, press the
–
/+
If the LEDs on the left of the display show
a continuous light, it is set for hard water. If
the LEDs on the right of the display show a
continuous light, it is set for soft water.
4. Confirm the settings by pressing the Start-
Button
.
Using a water filter
You can insert a water filter into the water tank
HART
. This filters limescale and particles out
4
of the water. This improves the enjoyment of
the tea and extends the service life of the tea
machine.
1.
Fill the water tank
water.
PAGE 34
simultaneously. The display
buttons for the brewing time.
HARD
MEDIUM
SOFT
MITTEL
halfway with fresh tap
4
2. Place the water filter with one of the two flat
sides into the tea machine pointing towards
the valve in the water tank
water filter sits tightly parallel to the bottom.
3. Now fill the water tank
fresh tap water.
4. The water filter must be changed every two
months to prevent excessive contamination
from microorganisms.
The water filter must be removed before
carrying out the descaling programme.
Remember to set the water hardness
to water filter! (see chapter „Setting the
water filter"). If you are not going to use
the tea machine for a longer period of
time, please make sure that the water
filter is placed in a full water tank.
Setting the water filter
1.
Switch on the tea machine.
2. Press the buttons fot setting the brewing
time –
/+
simutaneously. The display
on the tea machine shows the usage of
17
the water filter currently set.
3. To set the water filter, press the buttons for
filling capacity +
continuous light, you are using a water filter.
WEICH
If all LEDs are extinguished, you are not
using a water filter.
4. Confirm the setting by pressing the Start-But-
ton
.
so that the
4
completely with
4
. If all LEDs show a
water lter
no water lter