Aqua One Nautilus 2700UVC Instrukcje bezpieczeństwa - Strona 8
Przeglądaj online lub pobierz pdf Instrukcje bezpieczeństwa dla Systemy filtracji wody Aqua One Nautilus 2700UVC. Aqua One Nautilus 2700UVC 16 stron. Canister filter
Drukuj stronę
- 1. Table of Contents
- 2. Important Safeguards
- 3. Before First Use/Preparation
- 4. Know Your Filter
- 5. Recommended Filter Media Set up
- 6. Set up Instructions
- 7. Installation
- 8. Installation
- 9. Starting Your Filter
- 10. Cleaning Your Filter
- 11. Cleaning Your Filter
- 12. Changing Your UV Lamp
- 13. Trouble Shooting
- 14. Specifications
- 15. Installation
Installation
1. Remove all remaining components from the plastic
bags.
2. Locate your quick release tap connections. Ensure
the collars on the hose tails are all the way in, the locking
lever is in the up right position and that the O-rings are
lubricated. Fig 1
hosetail
locking lever
3. Insert the quick release tap connector into the top of
your filter unit. Fig 2
4. Now push the locking lever down. Ensure the tap
connector is inserted correctly. Fig 3
5. Locate your 2 pieces of 32mm hose.
6. Attach one to either hose tail on the quick release
tap connector. Push the hose on as far as possible.
Screw the collars antic lock wise to lock the hoses into
position. It is very important that this is done correctly.
Fig 4
collar
o-rings
Fig 1
7. Insert the canister in the desired location. Maximum
height from the top of the canister to the water lever of
the aquarium is 200cm. Fig 5
max. 200cm
Fig 2
8. And the minimum height is 10cm. Fig 6
min 10cm
Fig 3
9. It is now time to assemble the inlet and the outlet.
You will find the required components in the remaining
plastic bags.
9
GB
Fig 4
Fig 5
Fig 6