Aqua Perfecta Pura Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Systemy filtracji wody Aqua Perfecta Pura. Aqua Perfecta Pura 12 stron.

11Commissioning
Check all tubing again before turning the water on.
The tubing must be laid without twists or bending.
Turn on the water supply and check all connections for leaks.
Let the tank fill and empty 3 times before drinking the water.
After that, enjoy your Pura water!
Manual Timer
Set the next filter change time (day/month).
The cartridge filter should be replaced max. every 12
months.
12 Spare Parts
You will need to replace the combo cartridge filter and RO membrane periodically.
Code
AP-220
AP-221
13 Post Carbon
You also can choose post carbon for improving the taste of the product water.
Please do connections as follows:
1.
Install the bracket for post carbon onto the housing.
2.
Remove the external film from the post carbon.
3.
Connect the quick fittings to the ports at both ends of the post carbon.
4.
Make sure the flow direction of the post carbon is correct.
The arrow must point to the direction of the water flow

14 Technical Data

Daily product water volume: 100 gallons (@4 kgs of inlet pressure, @25
)
C
Tank holding volume: 6 liters (@4 kgs of inlet pressure, @25
RO membrane size: 1.8" x 12"
Recovery rate: 25%
Min. required inlet pressure: 2.0 bars
Item
Combo Cartridge Filter
RO Membrane 100GPD
AquaPerfecta.com
Day
Replacement cycle
Max. every 12 months or 28,000 liters
12 months
°
)
°C
Month
0800 007 3737