AVPro Edge FRESCO-SIX-A-GEN2 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz AVPro Edge FRESCO-SIX-A-GEN2. AVPro Edge FRESCO-SIX-A-GEN2 17 stron. A 70 meter hdbaset receiver with our sc2 scaler built in
Drukuj stronęFRESCO-SIX-A-GEN2
Troubleshooting
• Verify Power - When power is applied all lights on the front of the device will flash. You can also press
any of the 3 buttons on the side to change settings, the corresponding lights should change if the unit
is powered up.
• Verify Connections - Make sure all connected cables are properly connected.
o You can use the built in Test Pattern Generator to verify signal path from AC-EX70-SC2-R to the
display
• Extracted Audio not working - This unit DOES NOT DOWNMIX, the source must be set to 2ch for the
extracted 5 pin balanced audio port to work. For Toslink, audio must be set to 5.1 or less to work.
• Still having issues, contact us
o Support Direct - +1-605-977-3477
o All inquiries - +1-605-274-6055
o Submit a support request ticket
https://support.avproedge.com/hc/en-us/request
Page 11