DFI EC910-8MM Podręcznik użytkownika - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt komputerowy DFI EC910-8MM. DFI EC910-8MM 15 stron. Nxp i.mx8m mini processor ruggedized fanless embedded system
Również dla DFI EC910-8MM: Instrukcja szybkiej instalacji (16 strony)
Drukuj stronęX Installing an Antenna
Before installing the antenna, please make sure that the following safety cautions are
wellattended.
1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
Step 1:
There are antenna holes reserved on the right side of the system and by default cov-
ered by rubber plugs. Please remove the plug prior to installing an antenna.
Step 2:
Connect the internal cable to the board's antenna connector, screw the antenna con-
nector through the antenna hole with washers and nuts, and screw on the antenna as
illustrated below.
Module Connector
Cable
Antenna Connector
User's Manual | EC900-8MM / EC910-8MM
Antenna
Chassis Wall
Washer
Nut
X Mounting Options
The system features DIN-rail mount chassis that facilitates fast installation of the EC900-
8MM/EC910-8MM to a DIN rail.
The DIN Rail mount kit includes the following:
• Din-rail mount bracket
• 2 screws
Step 1:
Use the provided mounting screws to attach the din-rail mount bracket to the top side of
the system.
Step 2:
Install the sytem onto the rail.
Chapter 3
HARDWARE INSTALLATION
15