DFI KS156P-EHL Instrukcja szybkiej instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Przemysłowy komputer PC DFI KS156P-EHL. DFI KS156P-EHL 7 stron. 15.6" & 21.5" industrial touch panel pc

Drukuj stronę

Installing an Antenna

Before installing the antenna, please make sure that the following safety cautions are

wellattended.

1. Make sure the PC and all other peripheral devices connected to it has been

powered down.

2. Disconnect all power cords and cables.

Step 1:

There are antenna holes reserved on the right side of the system and by default covered by

rubber plugs. Please remove the plug prior to installing an antenna.

Step 2:

Connect the internal cable to the board's antenna connector, screw the antenna connector

through the antenna hole with washers and nuts, and screw on the antenna as illustrated

below.

Module Connector

DFI reserves the right to change the specifications at any

time prior to the product's release. This QR may be based

on the product's revision. For more documentation and

drivers, please visit the download page at

downloadcenter, or via the QR codes to the right.

Quick Installation Guide | KS156P-EHL & KS215P-EHL

Chassis Wall

Cable

Antenna Connector

Antenna

Washer

Nut