DFI KS-SD Series Instrukcja instalacji - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Panel dotykowy DFI KS-SD Series. DFI KS-SD Series 17 stron.
Drukuj stronę
Communication Port Pin Assignments
The system is equipped with 4 COM ports that enable serial communication.
The COM 1 and COM 2 ports can be switched between typical RS232 or
RS232 with power on its Pin NO.1 (12V) and Pin No.9 (5V).
COM 1/COM 2 (RS232 with power/422/485)
The system is also equipped with 3 display ports: DVI-D, HDMI, and VGA.
DC-in
VGA
Notes:
1.
The DVI-D port can be in HDMI or DVI-D.
2. The HDMI is a DP/HDMI combo port but can only transmit HDMI signals (unless wired as a DP
port). Please plug in an HDMI cable with the right orientation and alignment to avoid damage to
the connector. You should feel resistance (due to a pin on the right) if the cable is not inserted
correctly. Please see a video at https://youtu.be/SUj07rfN5l8 for detailed instructions.
Aligning side
(left)
COM 2
COM 3
COM 4
COM 3~COM4 (RS232/422/485)
1 2 3 4 5
1
2 4 5
3
6 7 8 9
6 8 9
7
RS422
RS232
DVI-D
(DVI-I connector)
HDMI
Angled-corner
pin
COM 1
1
2 4 5
3
6 8 9
7
RS485
Angled-corner
(up)
15
Align this edge with the
left side of the connector