DFI KS070-BT Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Panel dotykowy DFI KS070-BT. DFI KS070-BT 12 stron.

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it

have been powered-off.

2. Disconnect all power cords and cables.

3. The 8 mounting screws on the rear side of the system are used to

secure the cover to the chassis. Remove these screws and put them in a

safe place for later use.

Mounting screw

4. Lift the cover up to open the system.

5. The Mini PCIe and the micro SD slots are readily accessible after

removing the chassis cover.

Mounting screw