CPE 201055 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia CPE 201055. CPE 201055 9 stron. Detachable hose reel

201055 - DETAchAbLE hOSE REEL

5. Using a 6 mm (15/64 in.) drill bit, drill pilot holes

approximately 6.4 cm (2.5 in.) deep centered on the marks

you made in step 4.

6. Hang the mounting rail with the lag screws.

Install Mounting clips

1. Position the mounting rail on the wall at a convenient height.

2. Use a bubble level to ensure the mounting rail is horizontal.

3. Mark hole centre locations on the wall.

4. Remove hose reel.

6.4cm

5. Using a 10 mm (25/64 in.) drill bit, drill pilot holes

approximately 4.1 cm (1

you made in step 3.

6. Push plastic anchors into the holes.

7. Rehang hose reel.

8. Drive screws into plastic anchors tightly with a screwdriver.

1. Assemble the crank on to the hose reel as shown.

2. Secure with the crank screw.

ASSEMbLY

in.) deep centered on the marks

4.1cm