AVS Carflector Instrukcja instalacji - Strona 2

Installation Steps

Align hood shield on hood. With hood shield in its final

position, apply pressure to the tabs to secure the tape to

Secure the hood shield to the hood with (4) screw

•

Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost

pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your

product is top quality in terms of fit, durability, finish and ease of installation.

Auto Ventshade

™

NOTE: Actual application may vary slightly from illustrations.

the hood.

fasteners.

Lund International, Ventshade Accessories Division

655 Raco Drive, Lawrenceville, GA 30045

800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com

, the Auto Ventshade

logo, Chromeflector

Using a 1/4" drill bit, drill (4) holes into the underside

of the hood at the predrilled locations on the hood

Apply 4 bump on's to hood surface.

, and the AVS

logo are trademarks of Lund International, Inc.

Page 2 of 2

shield.