AVS 5000i Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Alarm samochodowy AVS 5000i. AVS 5000i 10 stron.

Drukuj stronę
Silent arm/disarm
The AVS 5000i can be programmed to silently arm and disarm. The
indicators will still flash.
Shock sensor (and optional sensor/s) disable
The shock sensor (and any auxiliary sensors) can be temporarily disabled.
To do this arm the alarm then press top button again within three seconds.
The siren will emit a long chirp. The next time the alarm is armed the
sensors will automatically turn back on.
Valet mode
The AVS 5000i can be put into 'Valet mode' which will stop the alarm
arming. This is a useful function if your vehicle is being serviced or
repaired.
To enter 'Valet mode':
1.
Disarm the alarm.
2.
Turn the ignition on.
3.
Push the top button on the remote 17 times.
4.
Turn the ignition off.
5.
The siren will chirp five times to confirm it is in 'Valet mode'.
In 'Valet Mode' only the central locking (if connected) and the boot release
will operate from the remote.
To exit 'Valet mode':
1.
Turn the ignition on.
2.
Push and hold the top button on the remote for two seconds.
3.
The siren will chirp five times to confirm 'Valet mode' is off.
Additional sensors
The AVS 5000i can be also be fitted with additional sensors including:
AVS ultrasonic sensor measures air pressure and movement
within the car and will trigger when that pressure changes. It is
designed to give greater protection for the interior of the vehicle.
This sensor is not suitable for situations where animals or children are left in
the vehicle or windows are left open while the alarm is armed.
AVS glass break sensor detects the sound frequency of breaking
glass.
AVS microwave sensor will detect body mass such as someone
entering the vehicle. It is designed for use on convertibles where
other sensors are not suitable.
where animals or children are left in the vehicle while the alarm is armed.
This sensor is not suitable for situations