AVS SENS212WIR Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera bezpieczeństwa AVS SENS212WIR. AVS SENS212WIR 5 stron.
Drukuj stronę
Quick installation
Adjusting the control panel
1. LED : OFF, ON
You can turn on the LEDs or off continuously
2. LED-ON : Fast, Slow
Fast : LEDs will be on at around 6 lux
Slow : LEDs will be on at around 3 lux
3. LED-BEAM : Low, Hi
Low : Wide IR Beam with 65ft range
Hi : Narrow IR Beam with over 65ft range
4. E-VBS
Extra video output for installation
Menu setting
* Push the SET button > menu open
* Icon
has sub menus. Press the set button
to enter sub menus.
* Icon --- means it is not available due to setting
options.
1. Up and Down : Move Cusor
2. Left and Right : Value
3. Left and Right
4. END : Push
Main Menu
1. LENS : DC(PUSH), MANUAL
2. EXPOSURE : PUSH : SHUTTER, BRIGHTNESS, AGC, SENS-UP, BLC, D-WDR, RETURN
3. WHITE BALANCE : ATW, AWB, AWC-SET, MANUAL, INDOOR, OUTDOOR
4. DAY/NIGHT : COLOR, AUTO, EXT, B/W
5. 3 DNR : ON, OFF ( Digital Noise Reduction)
6. SPECIAL : CAM TITLE, D-EFFECT, RS485, MOTION, PRIVACY, SYNC, LANGUAGE, RETURN/END
Push
Menu
Value
>
>
>
Previous
>
7. ADJUST : SHARPNESS, BLUE, RED, RETURN/END
8. RESET : Factory Reset
9. EXIT: To nish OSD setting
: SHUTTER : AUTO, FLK, MANUAL
: BRIGHTNESS : Adjust the brightness of lens
: AGC (Automatic Gain Control) : High, Middle, Low, O
: SENS-UP : AUTO, OFF
This function can accumulate the lighting by x 256 to make the picture brighter.
: BLC : OFF, BLC, HSBLC (High Suppress BLC)
HSBLC : This function can make masking of high lighting, like car head lighting.
: D-WDR (Digital Wide Dynamic Range), OFF, INDOOR, OUTDOOR
This function make the camera watch both bright and dark area at the same time.
INDOOR : When you install the camera indoor using D-WDR.
: AWB (Automatic White Balance ) : Automatically adjust white balance according
to condition.
This mode is recommended in most cases.
: AWC-SET : To nd the optimal setting only under current condition
Face the camera toward white paper fully and press the button.
: AUTO : DELAY, S-LEVEL, E-LEVEL
Automatically color changes to B/W according to the lighting
DELAY : Setting delay time to change color to B/W
Factory default : 5 means about 5 seconds, no. means seconds.
S-LEVEL : Setting starting level to change color to B/W
Factory default : 70 means about 3 lux. Don't change it (Technician only)
E-LEVEL : Setting ending level to change B/W to color
Factory default : 50 means about 6 lux, Don't change it (Technician only)
: ON : To reduce noise on the screen.
: MOTION : OFF, ON To transmit a signal when it detects motion on selected areas.
: PRIVACY : OFF, ON To mask areas you want, upto 8 areas selectable.
: LANGUAGE : ENGLISH, KOREAN, JAPANESE, CHINESS ( can be added by requests)