CPG 351GTCPG15NL Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Griddle CPG 351GTCPG15NL. CPG 351GTCPG15NL 9 stron. Countertop griddles
Również dla CPG 351GTCPG15NL: Instrukcja konwersji (6 strony)

Drukuj stronę

User Manual

351GMCPG15NL–351GMCPG72NL & 351GTCPG15NL–351GTCPG72NL

Lighting Instructions

The pilot light on the griddle has been pre-set at the factory . A screwdriver may be required for the

initial lighting to adjust the flame for your elevation.

1 .

Turn off the manual valve and wait 5 minutes to clear air gas .

2 .

Turn all knobs to "OFF" position .

3 .

Hold an ignition source (match) at pilot. When the flame is established, remove ignition source.

4 .

Turn burner knobs to "ON". If the burner does not ignite, promptly open pilot valve more. If pilot flame

appears larger than necessary, turn it down and reset burner ignition. The pilot flame should be as

small as possible but large enough to guarantee reliable ignition of burners when knobs are turned

to "ON" .

LIGHTING MAIN BURNER:

CPG MANUAL GRIDDLES:

To light burner, turn knob to "ON." Then back off to the desired flame level. The range of a adjustment is

virtually infinite between "ON" and "OFF."

CPG THERMOSTATIC GRIDDLES:

1 .

Select the burner required, depress and turn the corresponding gas control knob counter-clockwise to

"PILOT" position .

2 .

With the gas control knob depressed, manually light pilot burner .

3 .

Release gas control knob approximately 10–20 seconds after lighting pilot burner .

4 .

Pilot burner should stay lit . Provided it does not, repeat steps 2 and 3 .

5 .

Rotate gas control knob counter-clockwise to desired temperature mark .

6 .

The main burner will now be ignited automatically .