Allied Telesis Rapier AR 700 Series Podręcznik szybkiej instalacji - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik szybkiej instalacji dla Przełącznik Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 13 stron. How to set up pppoe between a linux client and access concentrator
Również dla Allied Telesis Rapier AR 700 Series: Jak skonfigurować (6 strony), Instrukcja rozwiązywania problemów (8 strony), Rozwiązywanie problemów (5 strony), Jak to zrobić (8 strony)
Drukuj stronę
Quick Install Guide
Figure 3: Connecting a PC directly to the router.
DISCONNECT MAINS SUPPLY BEFORE
REMOVING
POWE
Software Release 2.6.1
C613-04027-01 REV E
STATU
ETHERNE
PORT
ENGIN
ACT DAT
ER CLR
100 COL
T
PW RUN SY
SE
F
LNK
R
0
1
0
BAS
ETH port
AR700 Series Router
router
3.
Access the
's command line interface
Access the CLI from the PC, as described in the previous "Using the CLI to
configure a router" section.
4.
Enable IP
enable ip
5.
Assign the eth0 interface an IP address in the same subnet as the PC
add ip interface=eth0 ip=ipaddress mask=mask
6.
Save the configuration and set the
create config=your-name.cfg
set config=your-name.cfg
7.
On the PC's web browser, bypass the HTTP proxy server, if necessary
8.
Point your web browser at eth0's IP address
9.
At the login prompt, enter the user name and password
The default username is manager:
User Name: manager
Password: friend
For context-sensitive online help on AR725 and AR745 routers, click on the
Help button at the top of the sidebar menu or on any pop-up page.
straight-through cable
INTERFACE
SYN
Tx
Rx
B
BAY 1
BAY 0
router
to use it on bootup
ACT
N
PC
9