Avsl 130.041UK Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Avsl 130.041UK. Avsl 130.041UK 2 stron. 4g ready uhf masthead amplifier 4 outputs

Drukuj stronę

INSTALLATION:

Before installing, to avoid danger of electric shock, please ensure that all equipment is turned off and

disconnected from the mains supply. This amplifier requires 12Vdc power to operate, the output of

the amplifier needs to be connected to masthead amplifier power supply (130.060UK or 130.061UK)

or to a TV receiver that has 12Vdc power supply on its input.

Open the outer casing by pressing the two latches on the side and lift up the cover to

reveal the amplifier.

Connect the aerial to input of the amplifier.

Connect the output1 of the amplifier to masthead power supply or TV receiver. And

output 2/3/4 to extra TV sets or distribution amplifiers for further signal distribution.

Place the coaxial cables into the pre-cut grooves and close the outer casing lid. Use

the cable tie supplied to secure the amplifier to the mast.

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life. The goods must be disposed of

according to your local council guidelines.

Errors and omissions excepted.

130.041UK User Manual