DG VCU118 Skrócona instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt komputerowy DG VCU118. DG VCU118 15 stron. Fpga setup for 2-ch raid0 by nvme-ip demo
Drukuj stronędg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
8) Check LED status on FPGA board. The description of LED is as follows.
GPIO LED
0
1
2
3
9) After programming completely, LED[0] and LED[1] turn ON until finishing PCIe
initialization process. After that, LED[1] changes to OFF when PCIe completes
initialization process.
3-Aug-22
Table 2-1 LED Definition
ON
Normal operation
System is busy
IP Error detect
Data verification fail Normal operation
Figure 2-11 LED status after finishing PCIe initialization
1) PCIe Clock or system Clock is not locked.
2) Reset button is pressed.
Idle status
Normal operation
OFF
Page 13