CPI 1.2M Ku-BAND Tx Instrukcja montażu - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Antena CPI 1.2M Ku-BAND Tx. CPI 1.2M Ku-BAND Tx 15 stron.

CPI Satcom & Antenna Technologies

2.2

FEED SUPPORT ASSEMBLY

NOTE:

These instructions are intended as a general reference for feed

support assembly. If your antenna system has specific feed support

installation instructions, then refer to them at this time.

CAUTION:

ITEM NO.

PART NO.

VARIES

8031-008

8031-026

8201-041

8202-041

8101-009

During the assembly procedure, the sequence of instructions

must be followed. DO NOT TIGHTEN ANY HARDWARE UNTIL

INSTRUCTED. Refer to the feed support parts list and steps.

FEED SUPPORT PARTS LIST - TABLE 2.2

Feed Rod

Feed Support Tube

5 / 16" x 1.00" Bolt

5 / 16" x 3.25" Bolt

5 / 16" Flatwasher

5 / 16" Lock Washer

5 / 16" Hex Nut

1.2M Ku-BAND Rx/Tx SERIES 1132

DESCRIPTION

4096-630

QTY