CPI Alio Note Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czytnik kart CPI Alio Note. CPI Alio Note 12 stron.

Installation

Mount card reader through the back of the vendor door, and secure using

the four hex nuts on the vendor's mounting posts.

Secure green ground cable to a mounting post.

3.4.3

Mounting connection hub and connecting other vendor peripherals

Mount the card reader's connection hub magnetically inside the

and service.

Connect all other vendor peripherals to the connection hub as labelled and route all connections using zip ties and snips for cable management if

necessary.

Restore power to the vending machine and follow your company's procedure for activating a telemeter.

Alio Note card reader will connect to the cellular network.

3.5

The Alio Note card reader is fully configured for operation from the factory and once mechanically installed onto a Talos or Series 2000 note

validator and powered. The card reader is ready to accept cards for transactions.

Detailed information of connection status can be viewed by pressing the red "X" button on the card reader display 5 times. The display will

reconfigure to indicate the status.

Fig. 10: Mounting card reader through vendor door

machine so that its center button and LED ring is accessible for operation

Published by CPI

Alio™ Note Card Reader

44060-IG-01-01-EN_CPI_Alio Note Card Reader_Installation Guide_V1.0_.docx