dg casa 30250-Q Instrukcja montażu - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz dg casa 30250-Q. dg casa 30250-Q 9 stron. Charles metal canopy bed

STEP 4

ASSEMBLE WOOD SLAT TO END SLAT HOLDER AND CENTER SLAT HOLDER: NOTE,

WHEN ATTACHING PART G AND H TO PART 12 ENSURE THE PRONGS ON PART G AND

H ARE POINTING TOWARDS THE GROUND. ATTACH PART G TO ANY END OF PART 12,

THEN ATTACH PART H TO THE OTHER END OF PART 12 FOLLOWED BY ATTACHING ANY

END OF ANOTHER PART 12 TO THE REMAINING END OF PART H, THEN ATTACH PART

G TO THE OPEN END OF PART 12. THIS WILL ASSEMBLE ONE COMPLETE SLAT, SEE

DIAGRAM. REPEAT THIS STEP UNTIL A TOTAL OF 12 COMPLETE SLATS IS ASSEMBLED.

INSTALL EACH OF THE COMPLETED SLATS TO THE SIDE RAIL AND CENTER SLAT

SUPPORT: INSTALL ONE COMPLETED SLAT BY INSERTING THE PRONGS FROM PART G

INTO THE HOLES ON THE SIDE RAIL (PART 6), THEN INSERT THE PRONGS FROM PART H

INTO THE HOLES IN THE CENTER SLAT SUPPORT (PART 10) FOLLOWED BY INSERTING

THE PRONG OF PART G FROM THE REMAINING END OF THE COMPLETED SLAT INTO

THE SIDE RAIL (PART 6). REPEAT THIS UNTIL ALL COMPLETED SLATS ARE INSTALLED.