Avsl QU4 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System mikrofonowy Avsl QU4. Avsl QU4 6 stron. Quad uhf wireless system

"POWER" LED does not

light on receiver

"POWER" LED is lit but

no "RF" or "AF" LEDs

"POWER" and "RF"

LEDs are lit but no

"AF" and no sound

All LEDs lit but no

sound from mic

Microphone output is

very loud or distorted

Microphone output is

very low

1622

DISPOSAL:

Please dispose of the unserviceable device according to the current statutory requirement

Troubleshooting

Ensure power adapter is connected to mains and working properly

Ensure receiver is switched on

Ensure transmitter is switched on

Check that transmitter is not out of reception range

Check that transmitter batteries are good / charged

Check that transmitter switch is not in "MUTE" position

Ensure transmitter has good / charged batteries

Ensure there is no other nearby transmitter with the same frequency

Make sure receiver is properly connected to mixer / amplifier

Ensure that receiver and amplifier/mixer channel volumes are turned up

Turn down VOLUME on receiver

Reduce Gain on beltpack transmitter

Reduce Gain on mixer / amplifier

Ensure that XLR output is not fed to a Line input

Turn up VOLUME on receiver

Increase Gain on beltpack transmitter

Increase Gain on mixer / amplifier

Ensure that Jack output is not fed to a Mic input

Check transmitter batteries

Errors and omissions excepted.

171.840, 171.841, 171.842 User Manual