CPS IAQPRO SmartAir Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe CPS IAQPRO SmartAir. CPS IAQPRO SmartAir 18 stron. Professional indoor air quality meter
Również dla CPS IAQPRO SmartAir: Instrukcja obsługi (9 strony), Skrócona instrukcja obsługi i rozwiązywania problemów (8 strony)

CPS IAQPRO SmartAir Instrukcja obsługi
SPECIFICATIONS (CONT'D)
GOOD
Levels
(Green)
PM 2.5 (µg/m3)
0~30 µg/m3*
PM 10 (µg/m3)
0~50 µg/m3*
CO 2 (PPM)
0~599 ppm**
tVOC's (PPB)
0~149 ppb
*Per World Health Organization; **Per Engineering Toolbox.

QUICK START INSTRUCTIONS

SETTING THE tVOC SENSOR BASELINE (Approximately 24 Hours, 5 Minutes Required)
• User must set the tVOC sensor baseline PRIOR TO INITIAL USE.
• Follow instructions below or connect unit to CPS Link App for online guidance.
• Unit does NOT need to be connected to app during the initial 24 hrs. time period (Step 1- 2).
• Unit must be connected to CPS Link app to complete Step 3.
Step 1: (24 Hours Required) Select a secure location INDOORS,
plug unit into power source to turn ON and allow it to run for
24 consecutive hours. Light bar will initially turn RED, then
alternate Green/Red during this time period.
Step 2: (5 Minutes Required) Relocate the unit to a secure, dry
location OUTDOORS with access to power (do not locate in
direct sunlight). It is OK to disconnect the unit from the INDOOR
power source while relocating it to the OUTDOOR location.
Power unit ON and wait for 5 mins.
Color Range Values
SATISFACTORY
MODERATE
(Yellow)
(Dark Yellow)
31~60 µg/m3*
61~90 µg/m3*
51~100 µg/m3*
101~250 µg/m3*
600~999 ppm**
2499 ppm**
150~299 ppb
300~449 ppb
POOR
(Orange)
91~250 µg/m3*
251~430 µg/m3*
1000~
2500~
4999 ppm**
450~600 ppb
SEVERE
(Red)
>250 µg/m3*
>430 µg/m3*
>5000 ppm**
>600 ppb
7