Allied Telesis AT-8800 Series Jak to zrobić
Przeglądaj online lub pobierz pdf Jak to zrobić dla Router sieciowy Allied Telesis AT-8800 Series. Allied Telesis AT-8800 Series 8 stron. How to set up pppoe between a linux client and access concentrator
Również dla Allied Telesis AT-8800 Series: Podręcznik szybkiej instalacji (8 strony), Rozwiązywanie problemów (5 strony), Jak skonfigurować (9 strony)
Drukuj stronę
How To |
Set Up PPPoE Between a Linux Client and an Allied Telesis
Access Concentrator
Introduction
This document describes how to set up PPPoE between a Linux client and an Allied Telesis
device.
What information you will find in this document
This document is divided into the following sections:
•
Configuring your Allied Telesis Device‚ page 2
•
Configuring Your Linux Device‚ page 3
•
Starting the Link‚ page 4
•
Debugging and Verifying‚ page 5
•
Other Hints‚ page 6
Which products and software versions does this information apply to?
•
Products:
Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches
AR400 and AR700 series routers
•
Software versions: 2.7.1 and later
C613-16074-00 REV B
www.alliedtelesis.com