Allied Telesis AT-WR4662n Instrukcja szybkiej instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy Allied Telesis AT-WR4662n. Allied Telesis AT-WR4662n 2 stron. High-speed mobility wireless base router
Również dla Allied Telesis AT-WR4662n: Podręcznik referencyjny poleceń (16 strony)

Drukuj stronę

AT-WR4662n

High-Speed Mobility - Wireless Base Router

Safety Information

CE Declaration of Conformity (DoC)

The CE Declaration of Conformity is available at:

http://www.alliedtelesis.com/support/

This device complies with the essential requirements of the

R&TTE Directive 1999/5/EC. The following test methods have

been applied in order to prove presumption of conformity with

the essential requirements of the R&TTE Directive 1999/5/EC:

x EMC - EN 61000-6-3:2007

x EMC - EN 61000-6-4:2007

x EMC - EN 301 489-17 V2.1.1

x EMC - EN 50121-4:2006

x EMC - EN 50385:2002

x Radio - EN 300 328 V1.7.1

x Radio - EN 301 893 V1.5.1

Safety - EN 60950-1:2006+A11:2009+A1:2010

This product may be used in all EU countries and other

countries following R&TTE directive 1999/5/EC.

In France, outdoor use is limited to 10 mW within the band

range of 2454÷2483.5 MHz..

Additional requirements for any country may evolve. Please,

check with the local authorities for the latest status of their

national regulations for both 2.4GHz. and 5GHz. wireless

LANs.

Please, be compliant to local regulations declaring your country

and the real gain value of antenna system in software

configuration by means the following commands:

¾ world-mode dot11d

¾ antenna gain

Note, the value of antenna gain is related to the whole antenna

system; that includes the gain of installed antenna and power

absorption effects (loss) caused by coax cables, connectors and

any other objects like, in example, N-way splitter/combiner.

The maximum permitted antenna-gain value is 27dBi in the

5500-5700MHz band, 22dBi in the 5150-5350MHz band and

18dBi in the 2.4GHz band.

Local language safety statements

Please,

the

Allied

Telesis

website

http://www.alliedtelesis.com/

for

the

translated

safety

statement in your language

Allied Telesis

www.alliedtelesis.com

AT-WR4662n

| High-Speed Mobility - Wireless Base Router

Hardware Installation

Package Content

Check your package for the following items. If any item is

missing or damaged, contact your Allied Telesis sales

representative for assistance.

x 1x AT-WR4662n unit (802.11n, with 2x2 MIMO)

x 2x protective caps for N-type connector

x 1x field installable RJ-45 connector kit

x 1x pole mount kit with screws, U-bolts and nuts

x 1x this Quick Installation Guide

Hardware description

The device has the following connection points:

x 4x antenna connectors, N-Type - female

x 1x Ethernet port, IEEE802.3af PoE

Figure 1 depicts how the rating label on the equipment back

indentifies the antenna connectors.

The antenna connectors are identified as:

0a - interface dot11radio 0, MIMO chain 0

0b - interface dot11radio 0, MIMO chain 1

1a - interface dot11radio 1, MIMO chain 0

1b - interface dot11radio 1, MIMO chain 1

Figure 1: AT-WR4662n antenna connectors

Figure 2 shows the bottom of the device offering N-type

connectors, the Ethernet PoE connector and the protective

vent.

Figure 2: The bottom of AT-WR4662n

Allied Telesis

For connecting the equipment to the wired network, a

pre-assembled CAT 5 cable with outdoor waterproof RJ45

connector installed shall be used or the provided RJ45 assembly

can be field installed on a CAT 5 outdoor rated cable as shown

in Figure 3.

Figure 3: Weather proof RJ45 connector assembly

Mechanical Installation

Installing the device, first attach the provided pole mount

bracket or the optional AT-WR4501 wall mount bracket using

the 4 bolts provided with the equipment.

Figure 4: HSMIP Base Router mounted on pole

For pole installation mount the two provided U bolts as shown

in Figure 4 and fasten the four provided nuts until the

equipment is firmly held. Please do not exceed in order to avoid

mechanical deformation of bolts or mounting kit. For wall

mounting you will need to order the AT-WR4501 Wall Mount

kit.

Grounding the unit

On your pole always use proper wire grounding techniques in

accordance with your local electric codes. External antennas

must be properly grounded too.

Powering the unit

The device requires IEEE 802.3af PoE power feeding; attach

power sourcing equipment (PSE) to the RJ45 PoE connector.

USE ONLY PSE which is compliant to IEEE 802.3af, otherwise

you can seriously damage the device.