Allied Telesis SwitchBlade AT-AR440S Instrukcja konfiguracji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Router sieciowy Allied Telesis SwitchBlade AT-AR440S. Allied Telesis SwitchBlade AT-AR440S 11 stron. For typical network scenarios
Również dla Allied Telesis SwitchBlade AT-AR440S: Arkusz danych (1 strony), Arkusz danych (5 strony), Arkusz danych (3 strony), Arkusz danych (3 strony), Arkusz danych (2 strony), Broszura (6 strony)

Drukuj stronę

Allied Telesis SwitchBlade AT-AR440S Instrukcja konfiguracji

Using the GUI to configure the router

On first use of the GUI only, you will be taken directly to the Quick Start ADSL setup page.

Here you can quickly configure your ADSL basics. You should start by selecting your country

setting. This will automatically change the connection protocol and ATM profile for your country's

pre-configured default. Some countries offer many different connection types, so you still need to

check to see if these settings are correct for your ADSL Provider's requirements. Refer to the

details you collected in Table 1 on page 3.

Remember - If you are using a toolbar or plug-in on your browser to block pop-ups, disable

it while using the GUI. The GUI displays detailed configuration options and information in

pop-up windows.

Set up your AT-AR440S ADSL Router for Typical Network Scenarios