Avtech AVT1206TP Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa Avtech AVT1206TP. Avtech AVT1206TP 8 stron. Ir dome camera

INSTALLATION

Step1: Disassemble the camera case into three parts as illustrated in Figure 1.

Step 2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing

the bracket and routing the cables (if necessary).

Step 3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the

bracket, as shown in Figure 2.

Step 4: Secure the bracket to the wall (or ceiling), as shown in Figure 4.

Figure 2

Step 5: Slightly adjust the camera lens to where it's supposed to face, and replace Part 1 and Part 2 back, as shown in

Figure 4 and Figure 5.

Step 6: Hold the camera lens and Part 1, and rotate only Part 2 clockwise, as shown in Figure 5.

Step 7: Power on your camera, and check the viewing angle on the PC.

Step 8: Adjust the position, viewing angle, focal length and focus of the camera, if necessary.

For focal length and focus adjustment, please check Figure 7 to know where to do.

Figure 7

Base

Part 1

Figure 1

Figure 3

Figure 4

Figure 5

Part 2