Dell Adamo 13 Instrukcja serwisowa - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Laptop Dell Adamo 13. Dell Adamo 13 23 stron.

To start the Hardware Troubleshooter:

1. Click the Windows Vista Start button

2. Type hardware troubleshooter in the search field and press <Enter> to start the search.

3. In the search results, select the option that best describes the problem and follow the remaining troubleshooting steps.

Dell Diagnostics

Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

If you experience a problem with your computer, perform the checks in Lockups and Software Problems (see

Diagnostics before you contact Dell for technical assistance.

It is recommended that you print these procedures before you begin.

NOTE:

The Dell Diagnostics works only on Dell computers.

NOTE:

The Dell Drivers and Utilities disc is optional and may not ship with your computer.

Start the Dell Diagnostics from your hard drive or from the Dell Drivers and Utilities disc.

NOTE:

If your computer cannot display a screen image, see

1. Ensure that the computer is connected to an electrical outlet that is known to be working properly.

2. Turn on (or restart) your computer.

3. When the DELL™ logo appears, press <F12> immediately. Select Diagnostics from the start menu and press <Enter>.

NOTE:

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, and then shut

down your computer and try again.

4. If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities media.

5. Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive, and follow the instructions on the screen.

Starting the Dell Diagnostics From the Dell Drivers and Utilities Disc

NOTE:

Your computer does not have an optical drive. You need to connect an external optical drive to use the Drivers and Utilities disc.

1. Insert the Drivers and Utilities disc.

2. Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

NOTE:

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut

down your computer and try again.

NOTE:

The next steps change the boot sequence for one time only. On the next start-up, the computer starts according to the devices specified in

the system setup program.

3. When the boot device list appears, highlight CD/DVD/CD-RW and press <Enter>.

4. Select the Boot from CD-ROM option from the menu that appears and press <Enter>.

5. Type 1 to start the CD menu and press <Enter> to proceed.

, and click Help and Support.

Contacting

Dell.

Lockups and Software

Problems) and run the Dell