Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Laptop Dell E5400 - Latitude - Core 2 Duo 2.4 GHz. Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 38 stron. Latitude ultrabook series; e-family series; mobile precision series
Również dla Dell E5400 - Latitude - Core 2 Duo 2.4 GHz: Instrukcja obsługi produktu (39 strony), Specyfikacje (2 strony), Informacje o konfiguracji i funkcjach (10 strony), Instrukcja obsługi (32 strony), Wymiana płyty systemowej (4 strony), Instrukcja obsługi (34 strony), Instrukcja obsługi (46 strony), Podręcznik (46 strony), Instrukcja serwisowa (43 strony), Instrukcja obsługi (46 strony)

Dell Latitude E-Family & Mobile Precision Reimage "How-To" Guide

Follow these steps to install the IMSM / IRST driver:

1. For Microsoft XP 32 & 64-Bit Operating Systems:

2. For Microsoft Vista / Windows 7 (32 & 64-Bit) Operating Systems:

If Intel Rapid Recovery or RAID Technologies is to be used, ensure the following:

1. SATA operation mode in the BIOS is set to the appropriate IRRT, RAID On, or RAID mode

2. Microsoft Operating System was installed under IRRT, RAID On, or RAID mode and the latest

3. Install the following Intel IMSM application provided by Dell:



Installing the Intel IMSM driver using the Floppy Drive



Boot to the Dell Recovery DVD (RDVD) and select the Create RAID driver

from the list of items. You will need Floppy Disk Drive and a diskette for this

selection. The IMSM / IRST driver must be on the root of the A:\

Note: the latest IMSM / IRST driver can also be obtained from

under the "SATA Drivers" section



Once the driver is extracted and stored on the target diskette, boot to the

operating system CD and start the installation



In the initial stage of Windows Setup, press <F6> to install the third-party IMSM

SCSI or RAID drivers



When prompted, insert the floppy disk containing the IMSM driver and follow

the instructions provided by Windows Setup



After reading the floppy disk, either choose "Intel(R) ICH9M-E/M SATA AHCI

Controller" if in AHCI mode or "Intel(R) ICH8M-E/ICH9M-eSATA RAID

Controller" if in IRRT mode – select the appropriate driver to install



Installing the Intel IMSM / IRST driver after the installation of the Operating

System



Boot to the Operating System DVD and start the installation



After completing the OS installation, insert the Dell RDVD



Select the IMSM / IRST driver and follow the installation procedure

Note: the latest IMSM / IRST driver can also be obtained from

under the "SATA Drivers" section

Intel Storage IMSM / IRST driver is installed



Intel Matrix Storage Manager Application, or



Intel Rapid Storage Technology Application

support.dell.com