Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Laptop Dell E5400 - Latitude - Core 2 Duo 2.4 GHz. Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 32 stron. Latitude ultrabook series; e-family series; mobile precision series
Również dla Dell E5400 - Latitude - Core 2 Duo 2.4 GHz: Instrukcja obsługi (38 strony), Instrukcja obsługi produktu (39 strony), Specyfikacje (2 strony), Informacje o konfiguracji i funkcjach (10 strony), Wymiana płyty systemowej (4 strony), Instrukcja obsługi (34 strony), Instrukcja obsługi (46 strony), Podręcznik (46 strony), Instrukcja serwisowa (43 strony), Instrukcja obsługi (46 strony)

Drukuj stronę
Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Instrukcja obsługi
E-Family Reimage "How-To" Guide
-
Follow these steps to install the IMSM / IRST driver:
o For Microsoft XP 32 & 64-Bit Operating Systems:
o For Microsoft Vista / Windows 7 (32 & 64-Bit) Operating Systems:
-
If Intel Rapid Recovery or RAID Technologies is to be used, ensure the following:
o SATA operation mode in the BIOS is set to the appropriate IRRT, RAID On, or
RAID mode
o Microsoft Operating System was installed under IRRT, RAID On, or RAID mode
and the latest Intel Storage IMSM / IRST driver is installed
o Install the following Intel IMSM application provided by Dell:
2.6.5 Audio:
-
Under XP 32-Bit only with service packs earlier than Service pack-3 and for E-Family 1
generation only, the Audio driver must be installed prior to installing the graphics driver.
This applies to Intel graphics solution only
•
Installing the Intel IMSM driver using the Floppy Drive
•
Boot to the Dell Recovery DVD (RDVD) and select the Create RAID
driver from the list of items. You will need Floppy Disk Drive and a
diskette for this selection. The IMSM / IRST driver must be on the
root of the A:\
Note: the latest IMSM / IRST driver can also be obtained from
support.dell.com
•
Once the driver is extracted and stored on the target diskette, boot
to the operating system CD and start the installation
•
In the initial stage of Windows Setup, press <F6> to install the third-
party IMSM SCSI or RAID drivers
•
When prompted, insert the floppy disk containing the IMSM driver
and follow the instructions provided by Windows Setup
•
After reading the floppy disk, either choose "Intel(R) ICH9M-E/M
SATA AHCI Controller" if in AHCI mode or "Intel(R) ICH8M-
E/ICH9M-eSATA RAID Controller" if in IRRT mode – select the
appropriate driver to install
•
Installing the Intel IMSM / IRST driver after the installation of the
Operating System
•
Boot to the Operating System DVD and start the installation
•
After completing the OS installation, insert the Dell RDVD
•
Select the IMSM / IRST driver and follow the installation procedure
Note: the latest IMSM / IRST driver can also be obtained from
support.dell.com
•
Intel Matrix Storage Manager Application, or
•
Intel Rapid Storage Technology Application
Dell Confidential
under the "SATA Drivers" section
under the "SATA Drivers" section
st