Dell Latitude 3310 2-in-1 Konfiguracja i specyfikacja - Strona 29
Przeglądaj online lub pobierz pdf Konfiguracja i specyfikacja dla Laptop Dell Latitude 3310 2-in-1. Dell Latitude 3310 2-in-1 39 stron.
Drukuj stronę
Table 29. Performance (continued)
Option
C-States Control
Hyper-Thread Control
Power management
Table 30. Power Management
Option
AC Behavior
Enable Intel Speed Shift
technology
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN /WLAN
Description
Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.
● Wake on AC
This option is not set by default.
This option is used to enable/disable Intel Speed Shift Technology.
This option is not enabled by default.
Allows you to set the time at which the computer must turn on automatically.
The options are:
● Disabled—Default
● Every Day
● Weekdays
● Select Days
This option is not set by default.
Allows you to enable USB devices to wake the system from standby.
● Enable USB Wake Support
● Wake on Dell USB-C Dock—Default
This option if enabled, will sense the connection of the system to a wired network and
subsequently disable the selected wireless radios (WLAN and WWAN). Upon disconnection from
the wired network the selected wireless radio will be enabled.
● Control WLAN radio
This option is not set by default.
This option allows the computer to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the computer is connected to AC power supply.
● Disabled—Default - Does not allow the system to power on by special LAN signals when it
receives a wake-up signal from the LAN or wireless LAN.
● LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
● LAN Only - Allows the system to be powered on by special LAN signals.
● WLAN Only - Allows the system to be powered on by special WLAN signals.
● LAN with PXE Boot A wake up packet is sent to the system in either the S4 or S5
Description
Allows you to enable or disable the additional processor sleep
states.
● C states
This option is set by default.
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default
System setup
29