Dell Studio 1435 Instrukcja serwisowa - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Laptop Dell Studio 1435. Dell Studio 1435 42 stron. Notebook dell studio 1435

Back to Contents Page

Processor

Dell Studio™ 1435 Service Manual

Removing the Processor

Installing the Processor

CAUTION:

Before working inside your computer, follow the safety instructions that shipped with your computer.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press to

apply slight pressure to the center of the processor while turning the cam screw.

NOTICE:

To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

Removing the Processor

1. Follow the instructions in

Before You

2. Turn the computer over and remove the base cover (see

3. Remove the fan (see

Removing the

4. Remove the processor heat sink (see

NOTICE:

When removing the processor, pull it straight up. Be careful not to bend the pins on the processor.

5. Using a flathead screwdriver, rotate the processor release latch counterclockwise to release the processor from the processor socket.

6. Use a processor extraction tool to remove the processor.

processor

ZIF-socket cam screw

Installing the Processor

NOTICE:

Ensure that the cam lock is in the fully open position before seating the processor. Seating the processor properly in the ZIF socket does not

require force.

NOTICE:

A processor that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIF socket.

1. Align the pin-1 corner of the processor so that it points to the triangle on the ZIF socket, and insert the processor into the ZIF socket.

Begin.

Removing the Base

Fan).

Removing the Processor Heat

pin-1 corner of processor

Cover).

Sink).

ZIF socket