Cradlepoint AER 2100 Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Cradlepoint AER 2100. Cradlepoint AER 2100 6 stron. Aer2100 series temporary, pop-up & mobile branch networking
Również dla Cradlepoint AER 2100: Arkusz specyfikacji (8 strony), Skrócona instrukcja obsługi (6 strony)

Drukuj stronę
Quick Start Guide
/
AER2100 Series
configuration changes.

UPDATING FIRMWARE

Via Enterprise Cloud Manager
1.
Log in at
cradlepointecm.com
using your
Enterprise Cloud Manager credentials.
2.
Navigate to the Groups page. (This can also
be done for an individual device on the
Devices page.)
3.
Select a group and click on the Firmware option
in the top toolbar. In the dropdown menu that
opens, select the desired firmware version.
4.
Wait a moment while firmware is updated and
the router reboots.
Via the Local Administration Pages
1.
Log into the local administration pages
(see page 5). You may have changed the
Administrator Password.
2.
Select 'System > System Control > System
Firmware'.
3.
If new firmware is available, select 'Automatic
(Internet)'.
4.
Wait a moment while firmware is updated and
the router reboots (do not close the browser
6
Part Number: XXXXX-XXX
window when updating).
If you do not have an active Internet connection,
you may need to use the 'Manual Firmware
Upload' option. To use this option, download new
firmware to a local device and then upload it to
the router on the System > System Control >
System Firmware page.
SETTING THE APN
Depending on your modem, you may need to
specify the APN (Access Point Name).
SELECT THE APN
1.
Log into the administration pages (see page 5).
2.
Select 'Connection Manager'.
3.
Select the modem you would like to manage.
Click 'Edit' to open the WAN Configuration
editor.
4.
Select the 'SIM/APN/AUTH Settings' tab. In the
'Access Point Configuration' field, either select
the desired APN from the options displayed or
enter it manually.
5.
Input the username and password for
authentication if required by your carrier.
6.
Click 'Submit'.
ROUTER COMMUNICATION /
DATA USAGE
The factory default configuration of the router
is set to communicate with Cradlepoint and
other resources at regular intervals to access
the latest firmware and modem updates, clock
synchronization (NTP), and Enterprise Cloud
Manager (ECM) membership. Such communication
may result in data usage and applicable charges
regardless of whether the router uses a wired or
wireless Internet connection. To avoid such data
usage and potential charges, consult the following
Knowledge Base article:
knowledgebase.cradlepoint.com/articles/support/
router-communication-data-usage
©2015-2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com