Cradlepoint AER1600LP4 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Cradlepoint AER1600LP4. Cradlepoint AER1600LP4 5 stron. Application specific & micro branch networking
Drukuj stronę
Quick Start Guide
/
AER1600 Series
SIM Card Setup
Begin by activating your SIM card.
For AER1600LPE / AER1650LPE:
+
Open embedded modem SIM cover on bottom of
router and insert activated SIM into the slot marked
SIM 1 (use the other slot, SIM 2, for a secondary/
backup SIM).
+
Close embedded modem SIM cover.
NOTE: Router will not operate if embedded modem SIM cover is not fully closed.
For all models with removable MC400 modem:
+
Remove MC400 cover from side of router and insert
activated SIM(s) into removable MC400 modem
(optional for AER1600LPE / AER1650LPE and
AER1600 / AER1650).
+
Insert the SIM card into the slot marked SIM 1 (use
the other slot, SIM 2, for a secondary/backup SIM).
+
Insert the card with the notch-end first and the gold
contacts facing down.
+
Reinsert the removable MC400 modem, replace cover,
and insert the included security screw if desired.
NOTE: To remove modem, remove MC400 cover, attach included modem antennas
(finger-tighten only), and pull modem straight out.
4
Deploy & Manage Your Device with NetCloud Manager
Your new device includes a subscription to NetCloud Manager (NCM), which allows you to configure
and manage your new device remotely.
NetCloud Manager is a network management application that helps businesses deploy, configure,
and collect actionable intelligence for any registered device. It also includes SD-WAN capabilities,
like policy and orchestration, to enhance the security and scalability of your network and business
operations.
Explore everything you can do with NetCloud Manager. Visit
call us at:
+1 855-813-3385
Accessing NetCloud Manager
Wait for the device to connect to a network (WAN) through the SIM or via Ethernet.
To configure and manage your device via the cloud, log into NetCloud Manager. Open a browser to
cradlepointecm.com
and log in with the NetCloud Manager credentials received by email with your
account information. Navigate to "Devices > Routers" to configure the router. To create, modify,
and manage the router in a group, go to "Groups > Router Groups."
cradlepoint.com/netcloud-manager
If the device does not establish a cellular connection within 60
seconds, you may need to make configuration changes via the
local UI for NetCloud OS. If needed, follow the instructions in
the next section to log into NetCloud OS.
©Cradlepoint. All Rights Reserved.
or
|
+1.855.813.3385
|
cradlepoint.com