Dell Vostro 5391 Instrukcja konfiguracji i specyfikacji - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji i specyfikacji dla Laptop Dell Vostro 5391. Dell Vostro 5391 33 stron.
Drukuj stronę
Table 34. System setup options—Expert Key Management menu (continued)
Expert Key Management
Table 35. System setup options—Performance menu
Performance
Intel Hyper-Threading Technology
Intel SpeedStep
Intel TurboBoost Technology
Multi-Core Support
Enable C-State Control
Table 36. System setup options—Power Management menu
Power Management
Wake on AC
Auto on Time
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Block Sleep
Enable USB Wake Support
Default: PK.
Enables or disables the Intel Hyper-Threading Technology to use processor
resources more efficiently.
Default: ON.
Enables or disables the Intel SpeedStep Technology to dynamically adjust
processor voltage and core frequency, decreasing average power consumption
and heat production.
Default: ON.
Enabled or disabled the Intel TurboBoost mode of the processor. If enabled, the
Intel TurboBoost driver increases the performance of the CPU or graphics
processor.
Default: ON.
Changes the number of CPU cores available to the operating system. The
default value is set to the maximum number of cores.
Default: All Cores.
Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON.
Enables the computer to turn on and go to boot when AC power is supplied to
the computer.
Default: OFF.
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF.
NOTE:
If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables the USB devices to wake the computer from Standby mode.
Default: OFF.
System setup
27