Dell XPS 15-7590 Instrukcja ponownego obrazowania - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja ponownego obrazowania dla Laptop Dell XPS 15-7590. Dell XPS 15-7590 16 stron. Microsoft windows
Również dla Dell XPS 15-7590: Skrócona instrukcja obsługi (18 strony)
Drukuj stronę
Flashing the BIOS
It is recommended to flash the BIOS when an update is available or when you replace the system board. To flash the BIOS:
1
Turn on your computer.
2
Go to www.dell.com/support.
3
Click Product support, enter the Service Tag of your computer, and then click Submit.
NOTE:
If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.
4
Click Drivers & downloads > Find it myself.
5
Select the operating system installed on your computer.
6
Scroll down the page and expand BIOS.
7
Click Download to download the latest version of the BIOS for your computer.
8
After the download is complete, navigate to the folder where you saved the BIOS update file.
9
Double-click the BIOS update file icon and follow the instructions on the screen.
Clearing CMOS settings
In the event that, flashing your computer with the latest BIOS update results in your computer being unable to boot, a BIOS reset is
necessary. Clearing the CMOS settings will reset the BIOS to factory settings. For more information about clearing the CMOS settings, see
your computer's Service Manual.
Trusted Platform Module (TPM) security
TPM must be enabled in the BIOS setup program for it to be deployed on the computer. Follow these steps to enable and configure the
TPM:
1
Turn on or restart your computer.
2
Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
The BIOS setup program is displayed.
3
On the left pane, select Security > TPM 2.0 Security.
4
Select or clear any of the following options to enable or disable it, respectively:
•
Enabled (Default): The BIOS enables the TPM during POST and it can be accessed by the operating system.
•
Disabled: The BIOS will not enable the TPM during POST and it cannot be accessed by the operating system.
•
TPM On: The TPM is enabled and activated.
•
Clear: The BIOS clears the information stored in the TPM.
5
Save the settings and exit.
Updating or resetting the BIOS
Updating or resetting the BIOS
4
7