Dell 3008WFP - UltraSharp - 30" LCD Monitor Podręcznik użytkownika - Strona 36
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pulpit Dell 3008WFP - UltraSharp - 30" LCD Monitor. Dell 3008WFP - UltraSharp - 30" LCD Monitor 38 stron. Flat panel monitor
Również dla Dell 3008WFP - UltraSharp - 30" LCD Monitor: Instrukcja konfiguracji (2 strony), Specyfikacje (2 strony), Broszura (2 strony)
Drukuj stronę
Cannot adjust the monitor
OSD does not appear on the screen
with the buttons on the
front panel
The monitor will not go
No picture, the LED light is blue. When
into power saving mode.
press "+", "-" or "Menu" key, the message "
No S-Video input signal ", " No Composite
input signal " or " No Component input
signal " appears
No Input Signal when user
No picture, the LED light is blue. When
controls are pressed
press +, - or Menu key, the message No S-
Video input signal, No Composite input
signal, or No Component input signal
appears
The picture does not fill
The picture cannot fill the height or width of
the entire screen.
the screen
NOTE:
When choosing DVI-D mode, the Auto Adjust function is not available.
Universal Serial Bus (USB) Specific Problems
Common
What You Experience
Symptoms
USB
USB peripherals are not working
interface is
not
working
High
High Speed USB 2.0 peripherals working
Speed USB
slowly or not working at all
2.0
interface is
slow.
Troubleshooting the Dell™ Soundbar
Common Symptoms
No Sound
No power to Soundbar - the
power indicator is off
(built-in DC power supply. i.e.
3008WFP)
No Sound
Soundbar has power - power
indicator is on
Distorted Sound
Computer's sound card is used
as the audio source
Distorted Sound
Other audio source is used
Unbalanced Sound Output
Sound from only one side of
Soundbar
Check that your monitor is turned ON.
l
Reconnect the upstream cable to your computer.
l
Reconnect the USB peripherals (downstream connector).
l
Switch off and then turn on the monitor again.
l
Reboot the computer.
l
Some USB devices like external portable HDD require higher electric
l
current; connect the device directly to the computer system.
Check that your computer is USB 2.0-capable.
l
Some computers have both USB 2.0 and USB 1.1 ports. Ensure that the
l
correct USB port is used.
Reconnect the upstream cable to your computer.
l
Reconnect the USB peripherals (downstream connector).
l
Reboot the computer.
l
What You Experience
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if
l
the power indicator (green LED) on the front of the Soundbar is illuminated.
Ensure that the power cable from the Soundbar is plugged into the monitor.
l
Ensure that the monitor has power.
l
If the monitor has no power, see
l
problem.
Plug the audio line-in cable into the computer's audio out jack.
l
Set all volume controls to their maximum and ensure that the mute option is not
l
enabled.
Play some audio content on the computer (example, audio CD, or MP3).
l
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
l
Clean and reseat the audio line-in plug.
l
Test the Soundbar using another audio source (For example: portable CD player, MP3
l
player).
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
l
Set all Windows volume controls to their midpoints.
l
Decrease the volume of the audio application.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (For example: portable CD player, MP3
l
player).
Avoid using an audio cable extension or audio jack converter.
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the audio
l
source.
Decrease the volume of the audio source.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card
l
or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Turn off the monitor, unplug the power cord, plug back, and then turn on the
l
monitor.
Move mouse or hit any key on the keyboard or activate the video player, then
l
access the OSD to set Audio to off state.
Check the signal source. Ensure the Computer is not in the power saving mode
l
by moving the mouse or pressing any key on the keyboard.
Check to make sure Video Source to S-Video, Composite or Component is
l
powered and playing video media.
Check whether the signal cable is plugged in properly. Re-plug the signal cable
l
if necessary.
Reset the computer or video player.
l
Due to different video formats (aspect ratio) of DVDs, the monitor may display in
l
full screen.
Possible Solutions
Possible Solutions
Monitor Specific Troubleshooting
for monitor common