Dell D03T Podręcznik - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik dla Pulpit Dell D03T. Dell D03T 13 stron. Raid guide
Również dla Dell D03T: Konfiguracja i specyfikacja (23 strony)
Drukuj stronę
Configuring RAID with AMD RAIDXpert2
Creating the RAID volume
1. When your computer boots up, press F2 to enter the BIOS Setup menu.
2. Click Storage in the main menu.
3. In the SATA Operation section, select the RAID On mode.
4. Click APPLY CHANGES to save the settings, then click EXIT.
5. When your computer reboots, press the F12 key to enter the One-Time Boot Settings menu.
6. In the Pre-Boot Tasks menu, select Device Configuration.
The TPV EFI Device Manager appears.
7. From the Devices List, select RAIDXpert2 Configuration Utility.
8. On the Array Management pane, select Manage Array Properties.
9. Select Create Array.
10. On the Create Array pane, select Select Physical Disks to create the RAID mode.
The list of RAID types is displayed.
11. From the list, select the desired RAID type.
12. In the Select Media Type section, select the disk.
Ensure [X] is selected next to the disk.
13. Select Apply Changes to save the settings.
NOTE:
To check if the RAID array is created, on the Create Array pane, click Create Array. On the Array Management
pane, click Manage Array Properties to view the RAID volume that is created.
Downloading the RAID driver
NOTE:
These steps are to be performed only if you want to change or re-install the operating system.
1. Visit
www.dell.com/support
2. Click Drivers & Downloads and download the AMD Chipset Device Software.
3. Double-click the .exe file of the downloaded chipset driver.
4. Select Extract and save the package to your system.
Installing an operating system to the RAID array
NOTE:
You must configure the RAID volume before installing the operating system to the RAID array.
1. Insert the Windows operating system installation media or disk.
2. In the Windows setup box, click Browse.
3. Go to the folder containing the downloaded AMD RAID driver.
4. Load the rcbottom.inf in the folder.
5. Repeat steps 2 to 3 to load the rcraid.inf file, followed by the rccfg.inf file.
6. Complete the installation by following the instructions that are displayed on the screen.
NOTE:
You can verify if the RAID driver installation is complete by checking in the Device Manager. The installation of
the operating system is supported only on the first RAID volume.
10
Configuring RAID with AMD RAIDXpert2
and search for your product.
3