Dell D10U Instrukcja obsługi - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pulpit Dell D10U. Dell D10U 50 stron.
Również dla Dell D10U: Instrukcja obsługi (38 strony), Instrukcja serwisowa (20 strony), Konfiguracja i specyfikacja (39 strony), Instrukcja konfiguracji i specyfikacji (32 strony), Instrukcja obsługi (39 strony), Konfiguracja i specyfikacja (37 strony)
Drukuj stronę
a
Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
CAUTION:
the pins in the processor socket when removing the processor out of the socket.
c
Lift the processor out of the socket [3].
NOTE:
After removing the processor, place it in an antistatic container for reuse, return, or temporary storage. Do not
touch the bottom of the processor to avoid damage to the processor contacts. Touch only the side edges of the
processor.
Installing processor
1
Align the processor with the socket keys.
CAUTION:
Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the
socket.
2
Align the pin-1 indicator of the processor with the triangle on the socket.
3
Place the processor on the socket such that the slots on the processor align with the socket keys.
4
Close the processor shield by sliding it under the retention screw.
5
Lower the socket lever and push it under the tab to lock it.
6
Install the:
a
heat sink
b
system fan
18
Removing and installing components
The processor socket pins are fragile and can be permanently damaged. Be careful not to bend