Dell D13M Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pulpit Dell D13M. Dell D13M 50 stron.

Drukuj stronę

Option

Wake on LAN/WLAN

Block Sleep

Intel Ready Mode

Table 11. POST behavior

Option

Numlock LED

MEBx Hotkey

Keyboard Errors

Table 12. Virtualization support

Option

Virtualization

VT for Direct I/O

Trusted Execution

Description

This option allows the computer to power up from the off state when

triggered by a special LAN signal. Wake-up from the Standby state is

unaffected by this setting and must be enabled in the operating system.

This feature only works when the computer is connected to AC power

supply.

•

Disabled (Default)

•

LAN Only

•

WLAN Only

•

LAN or WLAN

•

LAN with PXE Boot

Allows you to block entering to sleep (S3 state) in OS Environment.

Block Sleep (S3 State)

This option is disabled by default.

This option allows you to enable the capability of Intel Ready Mode

Technology.

Enable Intel Ready Mode (this option is disabled by default)

Description

Allows you to specify if the NumLock function is enabled when the system

boots. This option is enabled by default.

Allows you to specify whether the MEBx Hotkey function should be

enabled when the system boots. This option is enabled by default.

Specifies whether keyboard related errors are reported when it boots. This

option is enabled by default.

Description

This option specifies whether a Virtual Machine Monitor (VMM) can utilize

the additional hardware capabilities provided by Intel Virtualization

technology.

•

Enable Intel Virtualization Technology - This option is enabled by

default.

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the

additional hardware capabilities provided by Intel Virtualization technology

for direct I/O.

•

Enable VT for Direct I/O - This option is enabled by default.

Allows you to specify whether a Measured Virtual Machine Monitor

(MVMM) can utilize the additional hardware capabilities provided by Intel

Trusted Execution Program.

•

Trusted Execution - This option is disabled by default.