Dell D13M Instrukcja obsługi - Strona 35

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pulpit Dell D13M. Dell D13M 50 stron.

Jumper settings

To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated on

the system board.

Table 17. Jumper settings

Jumper

PSWD

RTCRST

SERVICE_MODE

You can create a system password and a setup password to secure your computer.

Password type

Description

System password

Password that you must enter to log on to your system.

Setup password

Password that you must enter to access and make changes to the BIOS settings of

your computer.

CAUTION: The password features provide a basic level of security for the data on your computer.

CAUTION: Anyone can access the data stored on your computer if it is not locked and left

unattended.

NOTE: Your computer is shipped with the system and setup password feature disabled.

You can assign a new System Password and/or Setup Password or change an existing System Password

and/or Setup Password only when Password Status is Unlocked. If the Password Status is Locked, you

cannot change the System Password.

NOTE: If the password jumper is disabled, the existing System Password and Setup Password are

deleted and you need not provide the system password to log on to the computer.

To enter a system setup, press <F2> immediately after a power-on or re-boot.

In the System BIOS or System Setup screen, select System Security and press Enter.

Setting

Default

Description

Short: Default

Open: Clear Password

Open: Default

Short: Real-time clock reset. Can be used for

troubleshooting

Open: Default

Short: ME disable