Avtek 20 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Ładowarka Avtek 20. Avtek 20 4 stron. Charging cart
Drukuj stronę
Avtek Charging Cart 20
Thank you for purchasing a charging cart. We hope that our product will
provide you with convenience for years to come.
To ensure safe operation of the product and to make the best use of all of its
features please observe the following guidelines:
• Read this user manual carefully before you use the product for the first time.
• Observe all safety notices and heed all warnings at all times!
• The product may only be used as described in this user manual.
• Keep this user manual for future reference.
• Should you ever hand over the product to anyone, please include this user
manual with it. This user manual is a part of the product.
Remove contents from the package and lay out on cardboard or other
protective surface to avoid damage. Check the contents are correct and free
from damage before proceeding. If any parts are missing or damaged, please
call our support line for immediate assistance.
Product model
Product name
Product size（L×W×H）
Net weight
Carton size（L×W×H）
Gross weight
Main material
Product color
Product power
Introduction
Unpacking
Specification
Avtek Charging Cart
20
660*600*850mm
52kg
670*610*850mm
64kg
SPCC
Black
AC 95V-250V
Cooling system
Output
Status indicator light
Lightning protection
Overload protection
Electric leakage protection
Short circuit protection
Overcharge protection
Intelligent temperature
control
Self-braking wheel
Cart handles
Electrical properties
1. Poll charging: The 20 ports are divided into 5 groups, and only one
group can be charged at a time. Each charging time is 5 minutes.
After 5 minutes it will automatically switch to the next group. After
the last group is charged, it will return to the first group.
2. Charger access detection function: when a group of ports don't
have any charger it will be skipped when it is polled. The port light
will not be on if it is not involved.
3. After the charging test, charging is considered complete when the
charging current of A group is less than 0.02a, that is, 4W(220V).
This will end the charging of this port and switch to the next one.
Port groups with only chargers connected without connecting to
the computer or tablet will be considered as "charging completed",
and will be switched to the next group. Switching to next port group
after completed charging will take a few minutes.
●
1,5 A 110-250V AC
●
●
●
●
●
●
●
●
●