Dell Dimension 5100 Instrukcja serwisowa - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pulpit Dell Dimension 5100. Dell Dimension 5100 40 stron. Setting up your computer
Również dla Dell Dimension 5100: Konfiguracja (2 strony), Konfiguracja (2 strony), Konfiguracja (2 strony), Instrukcja konfiguracji (2 strony), Instrukcja konfiguracji (2 strony)

1 inverter connector

2 bottom flex-cable

connector

3 pull-tab

Installing the Display Panel

1. Connect the top flex-cable connector to the display panel connector.

2. Connect the bottom flex-cable connector to the inverter connector.

3. Lay the display panel in the top cover.

4. Route the display-feed flex cable so that it rests in the notch located in the bottom edge of the top cover.

5. Replace the eight M2 x 3-mm screws that secure the display panel to the top cover.

6. Replace the

Display Latch Assembly

Removing the Display Latch Assembly

CAUTION:

your computer's electronic components. You can do so by touching an unpainted metal surface.

1. Follow the instructions in

2. Remove the keyboard.

3. Remove the

4. Remove the

5. Remove the two M2.5 x 5-mm screws that secure the display latch assembly to the top cover.

6. Lift the display latch assembly up and out of the top cover.

Great user manuals database on

display

bezel.

Before performing the following procedures, read the safety instructions in your Owner's Manual.

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of

"Preparing to Work Inside the

display

assembly.

display

bezel.

UserManuals.info

Computer."