EnStar ENMD Series Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator EnStar ENMD Series. EnStar ENMD Series 20 stron.

- 1. Table of Contents
- 2. Sociable Remark
- 3. Safety Precautions
- 4. Safety Rules
- 5. Air Conditioner Features
- 6. Names of Parts
- 7. Accessories
- 8. Electronic Control Operating Instructions
- 9. Operatiing Instructions
- 10. Operating Instructions
- 11. Installation Instructions
- 12. Care and Maintenance
- 13. Troubleshooting Tips
- 14. Troubleshooting
NOTE:
The following instructions represent the
can be used for the
LCD
TO TURN UNIT ON:
SWING
NO WATER FILLING
SLEEP
TO CHANGE TEMPERATURE
SETTING:
TIMER ON TIMER OFF
MODE
ION
SLEEP
TO ADJUST FAN SPEEDS:
SWING
NO WATER FILLING
SLEEP
7
Unit Controls and Remote Control.
LOW
MED
FAN
HI
FOLLOW ME
DO THIS:
Press this button.
DO THIS:
Press to lower
Press to raise
SWING
NO WATER FILLING
FAN
LOW
MED
FAN
HI
FOLLOW ME
DO THIS:
Press to select
appropriate fan
speed
AIR CONDITIONER FEATURES
LED
Unit Controls, the same instructions
NOTE:
Press or hold either UP or DOWN button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
88 F(30 C). If you want the display to read the
actual room temperature, see To Operate on
Fan Only section.
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the UP and DOWN buttons at the
same time, for 3 seconds.
NOTE:
Used to select the Fan Speed in four steps-
Low, Med ,High or Auto(No indicator light
illuminates). Each time the button is pressed,
the fan speed mode is shifted.